Defeating Baldur Gate 3's Grym Is Simple If You Do This Trick At The Adamantine Forge (2024)


  • Grym is one of the tougher bosses in Baldur's Gate 3's first act, but there is a strategy to make it easy.
  • Having a druid in the party opens up the option to use Crushing Flight to deal over 1,000 damage to Grym under certain circ*mstances.
  • Halsin can be used for the strategy, but many parties may encounter Grym before Halsin becomes an active party member.

Grym can be a particularly tough boss in Baldur's Gate 3, but it actually has the potential to be an easy fight if the right strategy is applied. Baldur's Gate 3 is all about strategy and thinking outside the box, and it's not uncommon for its most challenging encounters to feature unique opportunities that circumvent threats or deal enormous damage. Experimentation can be haphazard, however, and figuring out an effective way of taking on a challenge like Grym is rarely a simple process.

Grym is a construct that can be found at the Adamantine Forge, an optional area in Act 1 of Baldur's Gate 3 that can be found when exploring the Underdark. It's not actually necessary to visit the forge at all, so it can be tempting to skip out on the fight and Grym's serious damage-dealing abilities to keep the main story moving. Although beating Grym in Baldur's Gate 3 doesn't have a major impact on the narrative, both the fight and the forge offer some powerful equipment, so it's better to take on the challenge.


"An Iconic, Engaging Mess Of Brilliant Ideas": Baldur's Gate 3 Review

Baldur's Gate 3 is imposing in stature and its best moments are truly memorable, but some early issues with scale suggest an uneven experience.

Grym Can Be Crushed In One Blow In Baldur's Gate 3

Defeating Baldur Gate 3's Grym Is Simple If You Do This Trick At The Adamantine Forge (2)

Traditional wisdom places the forge itself as an object of central importance when fighting Grym, as getting him to stand in the center of the crucible makes it possible to drop a massive hammer on him for bludgeoning damage. This is still far from enough to take down his entire health pool (300 on Balanced difficulty and 450 on BG3's challenging Tactician difficulty), however, and it's possible to outdo it by a significant margin. A Reddit post from chenvoso illustrates the superior method, which uses the enhanced weight of an owlbear to deal over 1,000 damage and eliminate Grym with room to spare.

How The Owlbear Strategy Works Against Grym In BG3

Defeating Baldur Gate 3's Grym Is Simple If You Do This Trick At The Adamantine Forge (3)

The key to this technique is the Crushing Flight ability that druids can use when taking on the form of an owlbear, which makes it possible to leap at an enemy to deal bludgeoning damage and knock them prone. Although this usually isn't an extraordinary amount of damage, it scales with height and weight, making it easy to abuse in the right scenarios. The crumbling ledge overhanging the Adamantine Forge and the Enlarge spell (or the Elixir of the Colossus that achieves the same effect) can serve to vastly increase both of these properties, resulting in a ridiculous but highly effective attack.


Giants might not show up in any official capacity in Baldur's Gate 3, but that doesn't mean there's no way to make a giant happen in game.

This isn't the only scenario where Crushing Flight can be put to great work in Baldur's Gate 3, but it's rare to find opportunities that are so perfect. Of course, the strategy requires a druid in the active party, and most parties using the Adamantine Forge are likely to be doing so before Halsin can be officially recruited as a permanent member. Nonetheless, anyone with a druid character at the ready can only stand to gain from this powerful technique, as long as developer Larian Studios never sees fit to patch over this bit of excellent fun in Baldur's Gate 3.

Source: chenvoso/Reddit

Defeating Baldur Gate 3's Grym Is Simple If You Do This Trick At The Adamantine Forge (5)
Baldur's Gate 3
Baldur's Gate
macOS , Microsoft Windows , PlayStation 5

August 31, 2023

Larian Studios

Larian Studios


How Long To Beat
50 - 100 hours

Baldur's Gate 2


Baldur's Gate 3 is a long-anticipated sequel to Baldur's Gate 2, released in 2000 from BioWare and now being handled by Larian Studios. Set 120 years after the events of Shadows of Amn, Baldur's Gate 3 puts players in the role of a customizable protagonist who has been captured and infected with a parasite that will turn them into a mind flayer. Before the process is complete, the ship they are on crashes, leaving them on a quest to cure themselves as they meet up with other survivors. Gameplay is turn-based and can be played co-operatively online or tackled alone in a single-player campaign with NPC allies.

  • Gaming
  • Baldur's Gate 3
  • Baldur's Gate

Your changes have been saved

Email Is sent

Please verify your email address.

You’ve reached your account maximum for followed topics.

Manage Your List



Follow with Notifications



Defeating Baldur Gate 3's Grym Is Simple If You Do This Trick At The Adamantine Forge (2024)


Defeating Baldur Gate 3's Grym Is Simple If You Do This Trick At The Adamantine Forge? ›

The easiest way to defeat Grym in Baldur's Gate 3 is to lure it to the Crucible platform in the middle before triggering the Forge Hammer by interacting with the Forge Lever. The Forge Hammer will strike the Crucible, dealing immense Bludgeoning damage and knocking Grym Prone.

How do you damage Grym in Baldur's Gate 3? ›

Grym is immune to most types of damage, and is resistant to cold, lightning, and force elements. However, you can only deal damage when it's standing in lava. Grym will target and move to the last character that dealt damage to it. Ideally, this has to be a character standing on top of the mold box.

Where is the adamantite forge Baldur's Gate 3? ›

The Adamantine Forge is located in the southeastern corner of the Ancient Forge region of the Underdark in Baldur's Gate 3. To get to here, you need to travel to Grymforge by going to the Beach region of the first Underdark area, then travel by boat.

How do you get to Grymforge in Baldur's Gate 3? ›

Grymforge, an area of the Underdark, is the prerequisite area to reaching the Adamantine Forge. There are several ways to reach this area, but there are two main options: Travel from the Goblin Camp hidden Underdark entrance. Travel from the Decrepit Village (from any other Underdark entrance)

How do you beat the adamantine golem in Baldur's Gate 3? ›

The easiest way to defeat Grym in Baldur's Gate 3 is to lure it to the Crucible platform in the middle before triggering the Forge Hammer by interacting with the Forge Lever. The Forge Hammer will strike the Crucible, dealing immense Bludgeoning damage and knocking Grym Prone.

Can you only make one adamantine weapon in BG3? ›

To craft a weapon or armor with the Adamantine Forge, select the Mould Chamber to open it. Choose a Mould from your inventory to place in the chamber. NOTE: Keep in mind that you only have enough ore to craft at most two items, so choose carefully!

How to make grym vulnerable? ›

To remove Grym's damage immunity, you need to position him in the lava. Once positioned in the lava, Grym receives a two-turn debuff called Superheated.

How to activate the Adamantine forge? ›

In order to activate it, you need to insert a mould, then add the Mithral ore to the crucible in the center, and finally use the forge lever that activates the massive hammer. This will lower the forge, where you can then activate the valve by the large grate to fill the forge with lava.

How many times can you use the Adamantine forge? ›

Because there's only two Mithral Ores to get, this means you can only use the Adamantine Forge twice in the whole game, despite the fact there's six various Moulds and potential creations. This means there's a hard choice to be made - pick carefully!

What should I make in the Adamantine forge? ›

Adamantine Splint and Scale Mail Are the Best Choices

It's best to forge one of each or two of the same pieces of armor depending on your party composition.

How to clear cave in Grymforge BG3? ›

Use bombs or use a barrel of smokepowder (there are plenty around, like a couple of barrels in a cave with a secret entrance, just around the corner from the druid enclave). For the cave-in where Deep Rothe are being whipped by Duergar, help them kill the Duergar and they will clear the obstruction for you.

How to use the adamantine forge BG3 reddit? ›

How do I activate the adamantine forge?
  1. Lower the forge platform.
  2. Place the mold you want to use into mold slot.
  3. Place a piece of mithril ore into the center of the forge.
  4. Turn the wheel to activate the lava, make sure everyone is on higher ground.
  5. Beat up Grym.
  6. Pull the lever to activate the hammer.
Oct 17, 2023

How to defeat Grym? ›

Specifically, to quickly kill Grym you need to:
  1. Turn the Lava Valve and ensure Grym is Overheated.
  2. Lure Grym to the middle of the Forge.
  3. Activate the Forge Lever.
Aug 11, 2023

What is the legendary action in Grymforge? ›

Once per round, Grym can use its Legendary Action to Reverberate when it is struck, doubling its movement and granting it 10 temporary hit points. Losing these temporary hit points triggers a shockwave that knocks targets back 4m and deals 4d8 Thunder damage.

What level for Grymforge BG3? ›

They'll be greeted by even more cultists on the other side, marking the beginning of a new adventure involving another True Soul and many more secrets. Grymforge is best suited for a party of Level 5 Adventurers. Expect to fight dwarves, constructs, elementals, and an assortment of underground monsters.

How to one shot Grym BG3? ›

Reddit user Tawxif_iq shared their own method of defeating Grym using just one attack, and it involves enlarging their bear character to pounce on the opponent from up above. The video clip showed that they were able to deal around 644 damage to Grym, which is quite a feat considering the difficulty of this encounter.

How does damage work in Baldur's Gate 3? ›

Resistance, Vulnerability and Immunity

Damage dealt to a creature with resistance to that damage type is halved. Damage dealt to a creature with vulnerability to that damage type is doubled. Damage dealt to a creature with immunity to that damage type is reduced to zero.

How do you stop the windmill in Baldur's Gate 3? ›

Once inside, to the left of the door there will be a pair of levers, one marked 'Brake' Lever and the other marked 'Brake Release' Lever. Pull the one labeled 'Brake' Lever to stop the windmill, or if you're feeling cruel, pull the other one to send the gnome flying across the landscape, killing him in the process.

Can you actually remove the tadpole in Baldur's Gate 3? ›

Not at all. Tadpoles, even unaltered, cannot be removed except by the most powerful and most skilled individuals in Faerun. These altered ones are an even bigger mess to deal with.

Top Articles
Latest Posts
Article information

Author: Jerrold Considine

Last Updated:

Views: 5405

Rating: 4.8 / 5 (58 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Jerrold Considine

Birthday: 1993-11-03

Address: Suite 447 3463 Marybelle Circles, New Marlin, AL 20765

Phone: +5816749283868

Job: Sales Executive

Hobby: Air sports, Sand art, Electronics, LARPing, Baseball, Book restoration, Puzzles

Introduction: My name is Jerrold Considine, I am a combative, cheerful, encouraging, happy, enthusiastic, funny, kind person who loves writing and wants to share my knowledge and understanding with you.